HOME  ›  Products  ›  Photodevices for Sensors  ›  Silicon Photodiodes  ›  KPD1201H

Products

Silicon Photodiodes
  • 製品検索

    Enter a Model No. (prefix/partial match)

KPD1201H

KPD1201H
Download datasheet

Features

  • Hermetic seal type for high reliability uses
  • Sharp directivity

Applications

  • Optical switches
  • Optical encoders
  • Pulse detectors
  • Sensors and industrial controls

Specifications

Absolute Maximum Ratings
ParameterSymbolValueUnitConditions
Reverse voltageVR15V
Reverse CurrentIR0.5mA
Forward currentIF10mA
Operating temperatureTopr-40 to +125Avoid dew condensation
Storage temperatureTstg-55 to +150Avoid dew condensation
Electrical and Optical characteristics
ParameterSymbolValueUnitConditions
Min.Typ.Max
Sensitive sizeS0.92x0.92mm2
Operating voltageVopr5V
Sensitive wavelengthλ400880(λp)1100nmλp=Peak wavelength
Open circuit voltageVop400mV1000lx @2856k
Short Circuit CurrentIsh60µA1000lx @2856k
Dark currentID1nAVR=5V
Terminal capacitanceCt50pFVR=0V, f=1MHz
Half angle23deg
KPD1201H

Silicon Photodiodes : other products

 Model No.Sensitive size
(mm)
Peak Sensitive Wavelength
(nm), Typ.
ResposivityHalf Angle
(deg)
PackageApplications
(µA)(IX)
KPD1201H0.92x0.92880(λp)60100023TO-18, hermetically sealedOptical switches, Optical instruments
KPD1203H0.92x0.92880(λp)81000100
KPD1203K0.92x0.92880(λp)111000140TO-18, epoxy resin lens
KPD1201C0.92x0.92880(λp)121000145epoxy resin lens on φ3 ceramic stem
KPID1301H1.10x1.10900(λp)60100028TO-18, hermetically sealed
KPID1301C1.10x1.10900(λp)121000145epoxy resin lens on φ3 ceramic stem
KPD1801H1.30x1.60840(λp)70100034TO-18, hermetically sealed
KPD1803H1.30x1.60840(λp)17100095
KPD1803K1.30x1.60840(λp)241000120TO-18, epoxy resin lens
KPD3065C2.59x2.59950(λp)701000120epoxy resin lens on φ6.5 ceramic stem
KPD30S2.59x2.59950(λp)681000120surface mount
KPD31S2.80x0.80950(λp)221000
KPD101M310.81x0.81850(λp)30100060φ3 plastic mold
KPD101M320.81x0.81850(λp)16100090
KPD104M320.81x0.81850(λp)10100070
KPD101M510.81x0.81850(λp)19100076φ5 plastic mold
KPD104M510.81x0.81850(λp)55100040
KPD151M531.25x1.25950(λp)161000130
KPD301M4X2.59x2.59950(λp)781000150side view plastic mold